Retournez votre appareil! (Vous pourrez alors profiter d'une meilleure présentation de nos produits)

Toutes les catégories

Vente de broyeurs de végétaux d'occasion aux meilleurs prix

— 819
Toutes les offres 13 nouvelles offres
Trier par :
  • Informations pour "Broyeurs"

    Abonnez-vous et restez informés de l'arrivée de nouveaux produits. Pas de spam !

    Oui ! Vous vous êtes abonné.

    Parfait ! Pour confirmer votre abonnement aux notifications, cliquez sur le lien que nous venons de vous envoyer par e-mail.

  • déchiqueteuse
    • Enchères: 8 jours restants

    ZERMA ZPS1500 | 2014

    Pays-Bas | Almelo

    20.000 € $ 21.204 £ 17.611

    shredder; capacity 46kW; rotor speed 74 rpm; rotor size ø457x1420mm; 102 rotor knives; 5 stator knives; feeding chamber opening 1745x1920mm; with under traveling outfeed belt conveyor size approx. 5400x700mm; Goudsmit built-on magnet with outfeed belt conveyor size 650x1600mm y.o.m. 2003; with steel container; central switchbox and central control cabinet with Siemens touch screen controller and camera observation system; machine weigth approx 6270kg

  • déchiqueteuse de bois;
    • Enchères: 6 jours restants

    New Holland FR9050 | 2012

    Pays-Bas | Sevenum

    35.000 € $ 37.108 £ 30.820

    chopper; read Hours: 2426; Reel 32 knives; maximum authorized mass: 11500 kg. tyres : for "Goodyear" Optitrac DT830, size: 800 / 75R32; behind "Michelin" MachXbib, size: 600 / 65R28; equipped with 6-cyl. "Iveco" FPT diesel engines , 13.9 liters; central lubrication; rear view camera; climate control and air suspended seat (Attention! excl. grass pick-up)

  • Vibration concasseur JÖST, +/- 10 tonnes de sable / h
    • Prix fixe

    Jost ZUFS

    Belgique | Amel


    Type: Zuph, serial number: 0771584 Year: 2007 Weight: 4000 kg External dimensions: 3150 mm x 2100 mm x 1800 mm vibration motor JVM TYPE JV2761150, 2 x 4 kW, 975 rev / min, 380 Hz with 2 feet 720mm (was on concrete) on silent blocks with pneumatic discharge flap

  • Chipper ZENO 500x160x2
    • Prix fixe

    Chipper ZENO 500x160x2 | 2009

    Pologne


    Chipper ZENO 500x160x2 - The machine in stock - Reconditioned - very good condition Technical parameters: - Main engine 45 kW - Stroke engines 2 x 2.2 kW - Entry width 500 mm - Inlet height 160 mm - tray measuring 300 cm - Two battle gear stretching - Two knives - Sieve 50 mm x 50 mm - rotor diameter 580 mm - The length of the rotor 510 mm - Hydraulic lifting shafts Overall dimensions machine: - Length 290 cm - Width 165 cm - Height 135 cm - Weight 3000 kg

  • Chipper LINDNER T 400 / 140-2
    • Prix fixe

    Chipper LINDNER T 400 / 140-2 | 1999

    Pologne


    Chipper LINDNER T 400 / 140-2 - The machine in stock - After the technical review - Stan bdb TECHNICAL PARAMETERS: - To edgings and waste joiner-sawmill, wood, etc. - Entry width 400 mm - Inlet height 140 mm - 2 knives - A screen with a fi fi 65 mm x 80 mmbr /> - Main engine power of 33 kW - 2 motors from 3 kW feed - 1 ROLLER pull - LOWER GEAR - 1 UPPER ROLLER pulling GEAR - FEEDER BELT SIZE: - Length 4900 mm - Width 400 mm Overall dimensions: - The length of 9000 mm - Width 2100 mm - Height 1500 mm - A mass of about 2000 kg The main advantages of the machine: * Stable construction * Austrian production LINDNER * Recommendable * For every professional

  • Chipper pour les branches, troncs Jensen
    • Prix fixe

    Chipper pour les branches, troncs Jensen | 1999

    Pologne


    Chipper for branches, trunks Jensen chipper for branches, trunks The chipper is designed for shredding tree limbs and trunks with a diameter of 300 mm. Chips are ejected through a tube rotatable base through 360 ° in relation to the chassis of the chipper. A cutting system besteht of a disc with 2 knives (sharpened on bothsides). The chipper is equipped with a hydraulic drive system feeding rollers driven by its own hydraulic pump. Technical data: - Chipper mechanical PTO - mounted on the arms of the tractor - The inlet diameter 300 x 300 mm - Number of knives - 2 cutting - Feeding speed from 0-33 [m / min] - Chipping capacity to 8 [m3 / h] - chip widthFrom 9 to 11 mm - Method of administration - hydraulic feeder - Blade diameter of 800 mm - choke dimensions: 800 mm x 500 mm Overall dimensions machine: Length: 1600 mm width: 1800 mm Height: 3200 mm Weight: 800 kg The main advantages of the machine: - The device is fully professional - Made in Germany - The machine Recommendable - For e

  • Chipper WEIMA WL 10
    • Prix fixe

    Weima WL 10 | 2000

    Pologne


    Chipper WEIMA WL 10 - The machine in stock - Reconditioned - Vg condition - Well-known reputable brand - WEIMA TECHNICAL DATA: - Main engine power 37 kW - Engine power of the hydraulic pump 1.5 KW - AUTO Auto Reverse - HYDRAULIC DRAWER - Length of the rotor 1000 mm - Shaft wielonożowy clatter 23 - Dimensions of the blades: 30 mm x 30 mm - Sieve fi 20 mm - Knives lace - The diameter of the nozzle suction fi 250 - rotor diameter 275 mm - Height drawers pressure 275 mm - The length of the drawer pressure of 800 mm Overall dimensions machine: - Length 270 cm - Width 230 cm - Height 200 cm - Weight 3000 kg The chipper can process a wide range of wood waste did accumulate, eg in the joinery or carpentry workshops. mills or in the furniture industry. This list includes pallets and boxes, as well as long and short scrap wood, veneer, particle board, fiberboard, plywood and joiner, examined as extensive furniture, window frames, doors and stairs.

  • Metso M & J 4000-8M semi-remorque
    • Prix fixe

    Metso Metso M&J 4000-8M semi-trailer | 2009

    Belgique

    250.000 € $ 265.058 £ 220.144

    Shafts & Cutting table need to be re-weld. But we can provide this!

  • Chipper Bruks 200M
    • Prix fixe

    Chipper Bruks 200M | 2009

    Pologne


    Chipper Bruks 200M Chipper disc with at electric motor Bruks 200M - The machine in stock - After the technical review - Very good condition TECHNICAL PARAMETERS: - Chipper Knife 2 - It has 8 blades casting - diametre Blade 1250 mm - Control cabinet - Two knives 40 cm x 12 cm - The two shafts Extending milled lower - One shaft Extending toothed upper Inlet dimensions: - Width 360 mm - Height 200 mm - Main Engine 37 kW - The engine of feed 1.5 kW - Feed on a chain Machine dimensions: - A length of 250 cm - Width 230 cm (370 cm with ejector) - Height 170 cm (330 cm with ejector) - Weight 2000 kg

  • Chipper Vecoplan 35/8 / 2T
    • Prix fixe

    Chipper Vecoplan 35/8 / 2T | 2009

    Pologne


    Chipper Vecoplan 35/8 / 2T - The machine in stock - Reconditioned - very good condition - ideal for the smoking chips Technical parameters: - Engine 22 kW - Feed motor 2 x 1,1 kW - Two knives - Width 350 mm throat - Throat height 80 mm - Year 1997 - Main engine 22 kW - Conveyor belt 4000 mm - Two shafts Extending - Sieve 20 mm x 20 mm - Length of the rotor 350 mm - rotor diameter 300 mm Overall dimensions machine: - Length 550 cm - Width 150 cm - Height 120 cm - Weight 1300 kg

  • Chipper Type WEIMA WL 15
    • Prix fixe

    Weima WL 15 | 2004

    Pologne


    Chipper WEIMA type WL 15 - The machine in stock - Reconditioned - Vg condition Technical data: - Main engine power 37 kW - Engine power of the hydraulic pump 1.5 KW - Total power: 56.5 kW - Engine power of 0.75 kW żmijki - AUTO Auto Reverse - HYDRAULIC DRAWER - rotor length 1500 mm - Shaft wielonożowy clatter 34 - Dimensions of knives: 40 mm x 40 mm - Sieve fi 20 mm - Knives lace - The diameter of the nozzle suction fi 250 - rotor diameter 275 mm - Height drawers pressure 275 mm - The length of the drawer pressure of 800 mm Overall dimensions machine: - Length 270 cm - Width 230 cm - Height 200 cm - Weight 3500 kg

  • Ecorceuse
    • Prix fixe

    Ecorceuse | 1995

    Italie


    Complete Debarker Nicholson roundwood task debarking max. Ø90cm surveying chop saw logyard with 8-10 Boxing

  • Ferrari d'occasion 2004 Désintégrateurs à vendre Italie
    • Prix fixe

    Ferrari d'occasion 2004 Désintégrateurs à vendre Italie | 2004

    Italie


    À venir

  • GT 375
    • Prix fixe

    GT 375 | 0

    France

    3.000 € $ 3.180 £ 2.641

    N° 3022T Semi-indépendante Commande téléflexible Rotor 1m - Fléaux mixtes Chassis à ressouder

  • 4 mètres
    • Prix fixe

    4 mètres | 0

    France

    4.500 € $ 4.771 £ 3.962

    Entraînement gauche et droite Boîtier Comer échange standard 2 roues de jauge Attelage déportable mécanique Défraichi Couteaux Y + palette ventilation Rotor OK pas de vibration (ne tourne pas assez vite)

  • Chipper goulotte allemande
    • Prix fixe

    Chipper goulotte allemande | 1995

    Pologne


    Chipper chute German - The machine in stock - After the technical review - Stan BDB TECHNICAL PARAMETERS: - Main Engine 22 kW - Drawer hydraulic - New blades 26 pieces - The new screen with openings fi 30 mm - Hydraulic pump with on engine power of 1.5 kW - Extended batch measuring 250 cm x 150 cm - maximum elementsize of 90 cm x 65 cm - Control cabinet Overall dimensions machine: - Length 280 cm - The width of 220 cm - Height 235 cm - Weight 2000 kg

  • Diesel chipper Jensen A 425 D
    • Prix fixe

    Diesel chipper Jensen A 425 D | 2003

    Pologne


    Diesel chipper Jensen A 425 D - The machine in stock - After the technical review - Perfect condition TECHNICAL PARAMETERS: - Throat dimension 250 mm x 250 mm - dimension of the hopper 1000 mm x 850 mm - Two pinch rolls gears twisted - Year 1998 - Machine equipped with reverse - NEW BATTERY - auto Reverse - Cutting disc diameter of 700 mm - Four knives - The dimensions of the knife 260 mm x 60 mm - engine two-cylinder 50 HP - Control handle for adjusting the feed rate - Hitch height adjustable - Feed cardan shafts - Inlet chopper Rotated on a chassis 360 "- Outlet chopper Rotated 360" - Road lighting - hand brake - Machine equipped with ignition

  • Chipper Żnin DWBA
    • Prix fixe

    Chipper Żnin DWBA | 2009

    Pologne


    Chipper Żnin DWBA - The machine in stock - Reconditioned - very good condition Technical parameters: - Main engine 30 kW - Stroke engines 2 x 1.5 kW - The year of manufacture 2007 - Dimensions of the throat 400 mm x 160 mm - Two knives - Sieve 50 mm x 50 mm - Pulling the upper shaft - Two shafts Extending lower - rotor diameter 400 mm - The length of the feeder 2500 mm - Conveyor belt Overall dimensions machine: - A length of 500 cm - Width 140 cm - Height 150 cm - Weight 1500 kg

  • Chipper OSKA 400
    • Prix fixe

    Chipper OSKA 400 | 2009

    Pologne


    Chipper OSKA 400 - The machine in stock - After the technical review - Stan bdb - PERFECT chips TECHNOLOGY - The width of the inlet 400 mm - Height inlet 140 mm - rotor two knife - 2 pinch rolls gears - rotor diameter 500 mm - The length of the rotor 420 mm - motor power 30 KW - The engine of feed 2 x 1.1 KW - Sieve with 50 mm x 50 mm - Conveyor belt Hay dimensions: Length 2000 mm width 400 mm Overall dimensions: - Length 420 cm - The width of 180 cm - Height 110 cm - Weight 1800 kg

  • Chipper déchets de menuiserie Umwelttech
    • Prix fixe

    Chipper déchets de menuiserie Umwelttech | 2009

    Pologne


    Chipper waste carpentry Umwelttech - in stock - Reconditioned - The machine is well-known reputable brand TECHNICAL PARAMETERS - Opening of the feed tube: 730 mm x 800 mm - rotor diameter 265 mm - The length of the rotor 800 mm - Total power: 30 kW - Number of knives: 18 pieces - Sieve fi 12 mm - Suction nozzle diameter fi 180 mm - Height drawers pressure 140 mm - HYDRAULIC DRAWER The overall dimensions of the machine: - The length of 2500 mm - Width 1500 mm - Height 2000 mm - Weight 1500 kg

  • Chipper Willibald MZA 3500 S
    • Prix fixe

    Willibald MZA 3500 | 1999

    Pologne


    Chipper Willibald MZA 3500 S - The machine in stock - Enhanced version - Capacity 180 m3 / h Technical data - Magnetic Separator - Main Engine 6 cylinder MAN - Engine output 420 hp - Liquid-cooled engine - Choke dimensions: - Width 125 cm - Height 60 cm - The length of filling 400 cm - 2 pinch rolls - first gear working on the hydraulics - Diameter of 50 cm - rotor diameter of 60 cm - Number of beaters 48 - Conduct chipper 4662 h - Three rows of knives against load adjustable hydraulics - Street lighting - Air brakes - Wood chipper on two axes - Hook approved

  • Chipper Hopper pour les plastiques
    • Prix fixe

    Chipper Hopper pour les plastiques | 2009

    Pologne


    Chipper Hopper for plastics - The machine in stock - After the technical review - Stan bdb - Engine: 2x 1.8 kW (very powerful gear) - 2 shafts with knives acting counter - Shaft length 490 mm - Shaft diameter 240 mm - speed shaft 18 RPM - Twelve blades on the shaft - Hopper dimensions: 490 mm x 570 mm Overall dimensions: - Length 145 cm - The width of 140 cm, - Height 290 cm - Weight 1000 kg The main advantages of the machine: * Stable construction * Recommendable * for every professional * Machine is not painted - original paint

  • Occasion Söderhamn Eriksson 240-12 2000 Hacker Et granulateurs à vendre Suède
    • Prix fixe

    Soderhamn Eriksson 24012 | 2000

    Suède


    Chipper canter 240-12 - Versatile quality reducing Chipper canter 240-12 is a proven, all-round reducer unit from Söderhamn Eriksson. The 240-12 Produces first class pulp chips and cants with smooth, sawn faces of highest quality with excellent dimensional accuracy. The 240-12 chipper canter can be used as a separate machine center or be combined with circular saws or bandsaws. With a wide variety of accessories, the 240-12 can be customized for log- or cant break down, straight or sweep sawing and for production speeds up to 90 m / min. All those features in a proven machine will give you a versatile solution reducer and reward you with the highest income possible from your production. FEATURES & BENEFITS Log diameter: 90-500 mm Feed speed: 25-90 m / min Chipper disc diameter: 1,250 mm Chipper disc types: Combi Compact, Combi Spiral & CombiCut Max reduction. 2 × 150 mm Positioning: Hydraulic linear positioners Main engine: 2 × 75-2 × 90 kW Weight, approx: 5600 kg SWEDABO ref. No. - ID

  • 3,80 m
    • Prix fixe

    3,80 m | 0

    France

    2.500 € $ 2.650 £ 2.201

    Débroussailleuse portée Rotor gros bois 1m Marteaux 50 % Distributeur en cabine Présentation moyenne Mécanique OK

  • Eschlböck BIBER POWERTRUCK Chipper
    • Prix fixe

    Eschlböck BIBER POWERTRUCK Chipper | 2017

    Belgique


    The new product line BIBER POWERTRUCK are two especially designed trucks for wood chipping. The VICAN convinces with a maximum in power output in operation, the TUROX with a great off-road performance. TUROX – the favourite off-roader .• off-the-road power chipper .• 630 PS (621 hp) with direct full power transfer .• 8×8 all-wheel drive and steerable rear axle VICAN – outstanding performance .• 750 PS (740 hp) – chipping and on the road .• tridem chassis .• steerable and liftable rear axle Biber 92 represents strenght! A cutting width of 122 cm and a rotor – diameter more than 1 m with more than 2 m² screen size processes up to 75 cm stem wood to perfect wood chips. The innovative Eschlböck rotor is besides the longer endurance easy to maintain. All parts are manufactured to be easily replaced after wearout or can be separately renewed after damage through a foreign object.

  • NEUSON-ECOTEC CH 1266 CHIPPER (maintenant TEREX THC 465
    • Prix fixe

    Neuson-Ecotec NEUSON-ECOTEC CH 1266 CHIPPER (now TEREX THC 465 | 2011

    Belgique

    276.000 € $ 292.624 £ 243.039

    Producer/Type: Neuson Ecotec/ CH1266 Year of production: 2011 Working hours: 792 h Dimensions L x B x H: 6810x2550x3830 mm Weight: 21.000 kg Engine: Deutz/ 653PS/ 480kW Control unit: CAN-Bus Rear conveyor: 7 m max. Capacity: until 280 srm Rotor: 16 Knives Condition: very good Options included: - Fire extinguisher - Central greasing - New knives Warranty: 6 months !! Delivery time: as long as available

  • Chipper Klockner 400x160
    • Prix fixe

    Chipper Klockner 400x160 | 2009

    Pologne


    Chipper Klockner 400x160 - The machine in stock - Reconditioned - very good condition - Ideal for chips technology Technical parameters: - Width of 400 mm - Height of the element 160 mm - Main engine 30 kW - Stroke engines 2 x 3 kW - Two hole - rotor diameter 560 mm - The length of the rotor 430 mm - Hydraulically adjustable clamps - Gear shafts Extending Overall dimensions machine: - Length 280 cm - Width 270 mm - Height 140 cm - Weight 3000 kg

  • Chipper allemande liserés scierie
    • Prix fixe

    Chipper allemande liserés scierie | 2009

    Pologne


    Chipper German to edgings sawmill - The machine in stock - After the technical review - ready to work TECHNICAL PARAMETERS: - The maximum width of 510 mm - The maximum height of the element 250 mm - Sieve size of 60 mm x 60 mm - Main Engine 55 kW - Two stroke engines of 2 x 2.2 kW - Daw pinch rolls gears - Translating power by belts - Hay with a length of 600 cm - The length of the rotor 530 mm - rotor width 600 mm - Height 250 mm rotor - rotor two knife Overall dimensions machine: - Length 270 cm - The width of 200 cm - Height 120 cm Weight 4000 kg

  • chipper KLOCKNER
    • Prix fixe

    chipper KLOCKNER | 2009

    Pologne


    chipper KLOCKNER - The machine in stock - Reconditioned - Vg condition Technical data: - engine power 18 KW - ELECTRIC Autoreverse - AUTOMATIC DRAWER -HYDRAULICZNIE infeed - Number of knives: 15 pieces - Dimensions of the blades: 30 mm x 30 mm - The diameter of the nozzle suction fi 200 - Inlet dimensions: 1400 mm x 650 mm The overall dimensions of the machine: - The length of 2500 mm - Width 1900 mm - Height 2000 mm - Weight 3000 kg

  • Chipper Vecoplan 400/160/2
    • Prix fixe

    Chipper Vecoplan 400/160/2 | 2009

    Pologne


    Chipper Vecoplan 400/160/2 - The machine in stock - After the technical review - Stan bdb - PERFECT chips TECHNOLOGY - The width of the inlet 400 mm - Height 160 mm inlet - rotor two knife - 2 pinch rolls gears - Rotor diameter 420mm - motor power 30 KW - The engine of feed 2 x 3 KW - Sieve size of 60 mm x 60 mm - Conveyor belt Hay dimensions: Length 6000 mm width 400 mm Overall dimensions: - Length 600 cm - The width of 160 cm - Height 110cm - Weight 1800 kg

  • Chipper Délignures scierie Palto OS 45/20
    • Prix fixe

    Chipper Délignures scierie Palto OS 45/20 | 2009

    Pologne


    Chipper edgings sawmill Palto OS 45/20 - The machine in stock - After the technical review - Stan bdb - Width 450 mm inlet - Height 200 mm inlet - 2 upper rollers - Tension - Gear - 2 bottom rollers - Tension - Gear - Motor power 75 KW - The engine of feed 2 x 1.1 KW - Sieve size: 18 mm fi - Shaft 3 knife - Feed speed tape set on the inverter Hay dimensions: Length 300 cm Width 45 cm Overall dimensions: - Length 5000 mm - Width 2200 mm - Height 1550 mm

  • Brush Chipper Bandit 90
    • Prix fixe

    Brush Chipper Bandit 90 | 2009

    Pologne


    Brush Chipper Bandit 90 - The machine in stock - After the technical review - Very good condition Technical data - The four-cylinder internal combustion engine with a power of 75 hp - A mouth with a 400 mm x 200 mm - Two rollers Extending gear - Full documentation - Automatic overload protection work shield - Hydraulic drive the pinch rolls - Chipper disc 2 Knife - Cutting disc diameter of 800 mm - Ejector dimensions 140 mm x 230 mm - Ejector Rotated 320 degrees - Chipper drive chassis - Chipper has street lighting Overall dimensions machine: - Length 350 cm - The width of 170 cm - Height 240 cm - Weight 1800 kg

  • Chipper Weima WL 7S
    • Prix fixe

    Chipper Weima WL 7S | 2007

    Pologne


    Chipper Weima WL 7S - The machine in stock - Reconditioned - very good condition TECHNICAL PARAMETERS: - Main engine of 18.5 kW - Hydraulic pump motor 1.5 kW - Length of the rotor 1000 mm - rotor diameter 295 mm - Height drawers pressure 295 mm - 23 knives flat - The dimensions of the knife 30 mm x 30 mm - Sieve fi 10 mm fi 20 mm - 200 mm diameter nozzle - Hydraulic drawer - control cabinet Overall dimensions machine: - Length 240 cm - Width 160 cm - Height 180 cm - Weight 1800 The chipper can process a wide range of wood waste did accumulate, eg. in the joinery or carpentry workshops, mills or in the furniture industry. This list includes pallets and boxes, as well as long and short scrap wood, veneer, particle board, fiberboard, plywood and joiner, examined as extensive furniture, window frames, doors and stairs. The main advantages of the machine: * Stable construction * German production reputable brand WEIMA * A leader among manufacturers of chippers * Recommendable * For every pr

  • R.18740
    • Prix fixe

    R.18740 | 1989

    France

    750 € $ 795 £ 660

    Rotobroyeur 1,60 m n°2096 Couteaux cuillers Prise de force 540 t/mn Hotte AR En état de marche

Informations pour "Broyeurs"

Abonnez-vous et restez informés de l'arrivée de nouveaux produits. Pas de spam !

Oui ! Vous vous êtes abonné.

Parfait ! Pour confirmer votre abonnement aux notifications, cliquez sur le lien que nous venons de vous envoyer par e-mail.