Retournez votre appareil! (Vous pourrez alors profiter d'une meilleure présentation de nos produits)

Toutes les catégories

Fraiseuses à console

— 83
Toutes les offres 4 nouvelles offres
Trier par :
  • CNC Vertical, 2 Axis ProtoTrak
    • Prix fixe

    Sharp HMV


    Working area of table 10 x 51 Inch Table travel (hand) 38" Saddle travel 16.5" Knee travel 18" Motor 3 PH Spindle Taper R8 Quill travel 5 Feed rate (per spindle revolution) 0.0017, 0.0032, 0.0053 Spindle speed R.P.M. 60HZ 60 4500 rpm Machine net weight 2,000lb

  • 3 axes CNC VMM

    Table size 50" x 10" T-Slots 3 .63" x 2.48" Travel (X, Y, Z) 30" x 17" x 23.5" Maximum quill travel 5" Quill diameter 3 15/16" Spindle taper NST 40 Spindle speed range 70 to 4200 rpm Spindle center to column face 19" Spindle motor 3 HP Power requirement Control 100V; 1P; 10A Power requirement Machine 220/440V; 3P; 8.5/4.25A Maximum weight on table 1320 lbs Height of table from bottom of bed 38" Maximum Spindle nose to table 23.5" Minimum height 85" Maximum height 95" Width of machine including table 73" Length with electric box door closed 76" Overall width including full table traverse. 108" Overall length with electrical door open 70" Shipping weight net 4400 lb

  • Informations pour "Fraiseuses à console"

    Abonnez-vous et restez informés de l'arrivée de nouveaux produits. Pas de spam !

    Oui ! Vous vous êtes abonné.

    Parfait ! Pour confirmer votre abonnement aux notifications, cliquez sur le lien que nous venons de vous envoyer par e-mail.

  • UNIVERSAL KNEE MILL

    Table Size: Table Size: 14" x 62.5" 355.60mm x 1587.50mm Longitudinal Table Travel: Longitudinal Table Travel: 34" 863.60mm Cross Table Travel: Cross Table Travel: 12" 304.80mm Spindle Taper: Spindle Taper: #50 Standard #50 Standard Spindle Speeds: Spindle Speeds: 30 - 2600 RPM 30 - 2600 RPM Feed Rates: Feed Rates: .375 IPM - 90 IPM 0.16 mm/sec -38.10 mm/sec

  • VERTICAL KNEE MILL

    Table Size: Table Size: 14" x 62.5" 355.60mm x 1587.50mm Longitudinal Table Travel: Longitudinal Table Travel: 34" 863.60mm Cross Table Travel: Cross Table Travel: 12" 304.80mm Spindle Taper: Spindle Taper: #50 Standard #50 Standard Spindle Speeds: Spindle Speeds: 30 - 2600 RPM 30 - 2600 RPM Feed Rates: Feed Rates: .375 IPM - 90 IPM 0.16 mm/sec -38.10 mm/sec

  • OKK-MH-2V
    • Prix fixe

    OKK MH-2V | 1989

    Japon | Tokigiwa


    Vertical/Horizontal Millings - T:1310mm×300mm テーブル左右最大移動距離:720 テーブル前後最大移動距離:250 主軸上下最大移動距離:450mm 主軸端とテーブル上面の距離:80~530mm 主軸中心とコラム面の距離:310mm  主軸回転数:1800rpm 主軸逆回転:可能

  • Knee-et-Colonne Milling Machine - univ. KRAFT MU-36S
    • Prix fixe

    KRAFT MU-36S

    Allemagne | Stockstadt am Main


    x-travel 720/1100/1300 mm y-travel 320 mm z-travel 450 mm table load 500 kg T-slot (width-distance-quantity) 3 x 18 x 80 mm spindle taper 50 ISO turning speed range vertikale Spindel: 60-1750 U/min (12 Stufen), horizontale Spindel: 60-1800 U/min (12 Stufen distance spindle nose and table vertikale Spindel: 190 – 590 mm, horizontale Spindel: 20 – 470 mm feeds X/Y/Z: 30-750 / 20-500 / 15-375 mm/min rapid travel x/y/z 1000 / 1000 / 750 mm/min weight of the machine ca. 2,7 t machine dimensions LxWxH 1820/2520 (1600 Tischl�nge)x2100x2000 mm spindle drive vertikal: 3 kw, horizontal: 5 kW universal milling head manuell schwenkbar, 360� DRO central lubrication halogen lamp European electric CE-design machine vice round table, manual milling and boring equipment CNC controls from Siemens/Fanuc/Heidenhain Semi guarding servo motors

  • Knee-et-Colonne Milling Machine - univ. KRAFT MU-46S
    • Prix fixe

    KRAFT MU-46+50

    Allemagne | Stockstadt am Main


    x-travel 900 mm y-travel 650 mm z-travel 450 mm table load 800 kg T-slot (width-distance-quantity) 5 x 18 x 80 mm spindle taper 50 ISO turning speed range (27 Stufen) 30 - 2050 U/min distance spindle nose and table 32 – 482 mm feeds X/Y/Z: 10-1000 / 10-1000 /6-640 mm/min rapid travel x/y/z 2200 / 2200 / 1100 mm/min power capacity 5,5/7,5 kW weight of the machine ca. 4 t machine dimensions LxWxH 1835 x 2362 x 2090 mm universal milling head manuell schwenkbar, 360� DRO central lubrication halogen lamp European electric CE-design Servo motors in allen Achsen machine vice round table, manual milling and boring equipment CNC controls from Siemens/Fanuc/Heidenhain Semi guarding

  • Knee-et-Colonne Milling Machine - univ. KRAFT MU-32S
    • Prix fixe

    KRAFT MU-32S

    Allemagne | Stockstadt am Main


    x-travel 720/800/1370 mm y-travel 300 mm z-travel 400 mm table load 400 kg T-slot (width-distance-quantity) 3 x 14 x 80 mm spindle taper 40 ISO turning speed range vertikale Spindel: 45-1660 U/min (11 Stufen), horizontale Spindel: 35-1500 U/min (12 Stufen distance spindle nose and table vertikale Spindel: 260-660 mm, horizontale Spindel: 75-475 mm feeds X/Y/Z: 0-1000 / 0-1000 /0-750 mm/min rapid travel x/y/z 1000 / 1000 / 750 mm/min weight of the machine ca. 1,9 t machine dimensions LxWxH 1720 /1820 (1370 mm Tischl�nge) x 1680 x 1860 mm spindle drive 2,9 kW universal milling head manuell schwenkbar, 360� DRO central lubrication halogen lamp European electric CE-design machine vice round table, manual milling and boring equipment CNC controls from Siemens/Fanuc/Heidenhain Semi guarding servo motors

  • Stanko 6R11
    • NOUVEAU !
    • Prix fixe

    STANKO 6R11

    Allemagne | Leipzig

    2.380 € $ 2.523 £ 2.095

    Milling machine, vertical, used, type: 6R11, Manufacturer: Stanko, Year: 1974 specifications: Tool: SK 40, speed range: 50 - 1600 rev / min. 16 levels, X / Y / Z 630/200/360 mm, table size: 1000 x 250 mm, weight: 2.5 t

  • Fraiseuse - verticale BOKO F 2

    Features: - Digital display - 3 axis ******************************************* ************************************ !!! NEW FOR YOU AS A SERVICE !!! Machinery leasing up to 60 months with no down payment, no residual value, personal counseling and individual leasing rate calculation on request. ************************************************** *****************************

  • Knee-et-Colonne Milling Machine - hori.WMW- FRITZ HECKERT FW 250x1000
    • Prix fixe

    WMW Heckert FW 250x1000 | 1972

    Allemagne | Leipzig


    distance rear edge table / column guidance: min/max: 65/285mm distance spindle center to clamping surface:min/max: 35/415mm distance spindle nose to counter bearing:min/max: 0/450mm machine base On sale as is, for a small budget! i.D.

Plus d'offres d'autres fournisseurs

Informations pour "Fraiseuses à console"

Abonnez-vous et restez informés de l'arrivée de nouveaux produits. Pas de spam !

Oui ! Vous vous êtes abonné.

Parfait ! Pour confirmer votre abonnement aux notifications, cliquez sur le lien que nous venons de vous envoyer par e-mail.

Pays